BMS Power Box (PBX) Non-Turbo Tuner

재고가 없는 상품입니다.

BMS Power Box (PBX)
Non-Turbo BMW Performance Tuner

BMW Performance Chip
MORE HORSEPOWER! & MORE TORQUE!
Plus Adjustable Throttle Pedal Re-Mapping for Snappier Response


The BMS Power Box features dyno gains of up to 10+ Horsepower and 10+lb-ft Torque, throttle remapping for snappier response, 7 performance maps, and easy installation and removal. Finally you can enjoy the car how it should have come from the factory.

BMS Power Box N52 Engine





Features
  • Up to 10+ More Horsepower & 10+ More lb-ft Torque
  • Throttle Re-mapping for Better Response / Reaction
  • Removes "dead area" delay in gas pedal
  • 7 Different Maps / Settings for more enjoyable driving
  • Can be set and turned on and off from inside the car
  • Invisible to dealers equipment
  • Made in USA
Applications
  • BMW 1 Series E82 E87 E88 - 125 128 130 Coupe and Convertible
  • BMW 3 Series - E90 E91 E92 E93 - 323 / 325 / 328 / 330 Sedan, Touring, Coupe and Convertible
  • BMW 5 Series (2006+ only) E60 E61 - 525 / 528 / 530 Sedan and Touring
  • BMW 6 Series E63 E64 - 630 Coupe and Convertible
  • BMW 7 Series E65 E66 - 730 Sedan
  • BMW X5 E70 - 3.0si Sports Activity Vehicle
  • BMW Z4 E85 E86 (2006+ only) - 2.5si / 3.0i Roadster and Coupe
  • BMW Z4 E89 - sDrive23i / 28i / 30i
  • Does NOT work on any F10 5 Series Vehicles
Installation takes around 20 minutes using basic hand tools and is completely reversible with no cutting of wires. Simply extract the factory wire and replace it with the corresponding BMS Power Box wire. Installation is very discrete allowing most customers to leave the unit installed for basic service is NOT TRACEABLE through the factory ECU/DME or the BMW dealerships equipment and does not hurt fuel economy during normal driving. Maps stay selected until you change them.
Dynos below show horsepower and torque increase at the wheels over stock.
BMS Power Box Dyno
BMS Power Box Dyno
BMS Power Box BMW 330i dyno
BMS Power Box on a completely stock automatic BMW 328i on 91 octane.
BMS Power Box on a completely stock automatic BMW 328i on 91 octane.
BMS Power Box on a completely stock automatic BMW 330i on 91 octane.
BMS Power Box Map Guide

Map 0 - Disables BMS Power Box (Stock)
Map 1 - 30% throttle remapping, performance tuning on
Map 2 - 60% throttle remapping, performance tuning on
Map 3 - 100% throttle remapping, performance tuning on
Map 4 - 30% throttle remapping, performance tuning off
Map 5 - 60% throttle remapping, performance tuning off
Map 6 - 100% throttle remapping, performance tuning off
Map 7 - throttle remapping disabled, performance tuning on
BMS Power Box
How to Swtch Maps on the BMS Power Box
BMS Power Box Install Video

How to Switch Maps from the Driver's Seat
Insert the keyfob and press the start button to turn the ignition on (lights on the dash but the engine is not running). Press and hold the gas pedal down to the floor for 4 seconds or more, then release. This puts the Power Box into listen mode. If you start the engine at this point you will be on map 0. For performance maps press the gas pedal to the floor and quickly release one time for each map you would like to select. For example, for map 3 press and release the gas 3 times, then start the engine. Your map setting will be saved until it is changed.

What is the BMS Power Box?
The BMS Power Box is a BMW Performance Chip with a pre-programmed internal chip that intercepts the stock signals from your BMW's electronic control unit (ECU) and changes them to achieve better performance by adjusting the air fuel ratio and spark timing. Made specifically for the BMW inline six cylinder motors. The PBX also has an adjustable throttle feature that can be combined with the Performance chip feature by selecting a setting or "map" as we call it. The BMS Power Box contains both a performance chip which gives you an extra 8-10 Horsepower at the wheels and an adjustable throttle boost feature that makes the gas pedal send a boosted throttle signal in increments of 30%, 60%, and 100% over the stock BMW signal. Depending on what setting/ "map" you select you can create a perfect blend of throttle response and horsepower and torque. For maximum horsepower and throttle boosting select MAP 3. The BMS Power Box is completely invisible to the BMW dealership and testing equipment so you can leave it in for routine service.

How does it compare?
Other products just have a single setting throttle booster. No horsepower/performance is gained or you have to reflash your ECU and there is no throttle boost feature. They are costly and are detectable by BMW's equipment.

What will the BMS Power Box do?
The BMS Power Box will make your vehicle more responsive, spirited and fun to drive. It will make your vehicle faster by increasing the horsepower and torque. It works well with other modifications like intakes and exhausts, but can also be used alone. It will remove the "dead space" when you push on the non responsive stock BMW accelerator. It changes the way the car drives and feels. You can turn it on and off from the comfort of your drivers seat to feel the difference. The BMS Power Box is the clear choice.